By replacing the sealing unit, a single machine can form three-side seal and vertical pillow pouches.
Features & benefits
- Adopting a servo motor
Servo motor control is used for film pitch feed, and the touch panel makes it easy to match printing patterns and change pouch length. - Sealing bar heat sealing system
The sealing bar heat sealing system for vertical and horizontal sealing ensures uniform sealing pressure. Compared to the fixed sealing bar system, it also provides more sealing time. - Low cost
A low-cost machine with a simple mechanism has been realized. - Safety measures
Covers are provided for areas where there is a risk of burns, pinching, amputation, etc. Opening these covers stops the machine.
Application examples
Granular dashi stock,Tea,instant coffee,granulated sugar,dried vegetables,dried seaweed,seasonings for rice soup,furikake,Bean snacks,rice biscuits,round cookies,chewing gum,glass marbles,candy,powdered and granular pharmaceuticals,health foods,tablets,pills,capsules,bath salts,desiccants, etc.
Machine for small bags | Machine for large bags | |
---|---|---|
Type | K-360 | M-360 |
Packaging volume*1 | 0.5 to 30cc | 30 to 150cc |
Packaging capacity*1 | 20 to 80 pouches per minute | 20 to 60 pouches per minute |
Finished bag dimensions*1*3 | Three-side seal pouch Width: 30 to 100 mm Length: 30 to 130 mm Vertical pillow pouch Width: 15 to 70 mm Length: 30 to 130 mm |
Three-side seal pouch Width: 30 to 120 mm Length: 30 to 180 mm Vertical pillow pouch Width: 50 to 110 mm Length: 30 to 180 mm |
Machine dimensions | 694(W)×730(D)×1,800(H)mm | 694(W)×730(D)×2,100(H)mm |
Machine mass | Approx. 300kg | Approx. 350kg |
Power consumption | Approx. 2kw | Approx. 2kw |
Air consumption*2 | Approx. 0.5MPa・120L/min(ANR) | Approx. 0.5MPa・200L/min(ANR) |
Power supply | 200 V, three-phase, 50/60 Hz | |
Standard accessory devices |
Heater disconnection detection device
Print registration control phototube device Film tensioner Film end detection device I-notch cutting device(for Three-side seal pouch)
Safety cover with stop function
Rotary cutting device Chute part tapping device Touch panel Stainless steel cover |
|
Optional devices |
Seam tape detection device
Horizontal seal section bite detection device Empty bag detection device Seal pressure detection device Intermediate shutter device Dust collector Dust collection timing valve device Static eliminator Ejection device Printing device Printing inspection device Nitrogen gas filling device Perforation and multiple cutting device Jagged blade cutting device Rotary cutting base device Hole punching device (for vertical pillow) Header sealing device (for vertical pillow) Sealing bar-embedded cutting device (for vertical pillow) Sealing unit (for three-side seal or vertical pillow)
Hopper level detection device
Variable-volume rotary disk Multi-filling device Collective rotary disk device Bucket conveyor device Belt conveyor Sub-rotary disk device Feeder Petit scale Auger filling device Tablet and pill counting device Counting and separating device Counting and sorting device Weight checker Support for validation Special overseas specifications (UL/CE compliant) |
- * Machines other than the above specifications can also be manufactured.
- *1 Figures vary depending on the filled item, packaging material and bag dimensions.
- *2 Air consumption figures are without optional devices.
- *3 Width is variable by replacing the film guide, and length is variable by servo motor.