Simultaneous four-side seal pouch forming, filling and packaging in multiple rows enables space saving and large-volume packaging.
Features & benefits
- Print registration control
The print registration control device (two-roll type) controls the front and back sides separately, allowing the use of different film materials for the front and rear sides. The film material feeding type can be selected from the one-roll center-slitter type and the two-roll type, depending on the number of rolls. - Easy line formation
By combining an automatic stacking device, the machine can be connected to a horizontal bag feed seal pouch packaging machine, horizontal pillow machine, banding machine, cartoning machine and other machines to form a line. - Flexible design
The machine can be designed according to customers’ needs.
Application examples
Powdered soups,seasonings, ingredients, granulated sugar, instant coffee, Powdered cream, health foods, powdered soft drinks, tablets・pills and powdered and granular pharmaceuticals, desiccants, Oxygen scavenger, food additives, bath salts, etc.
| Series | CP-F | CP-FP | CP-U | CP-UP |
|---|---|---|---|---|
| Print registration control | None | Included | None | Included |
| Number of rows*1 | 2 to 12 | |||
| Packaging volume*2 | 0.5 to 100cc | |||
| Packaging capacity*2 | 40 to 80 pouches per minute/row | |||
| Finished bag dimensions*2 | Width: 30 to 120 mm (Specified inside dimensions) Length: 30 to 150 mm (Specified inside dimensions) |
|||
| Machine dimensions | 1,400 to 2,000(W)×2,300(D)×2,000 to 2,300(H)mm | |||
| Machine mass | Approx. 2,000kg | |||
| Power consumption | Approx. 6 to 8kw | |||
| Air consumption*3 | Approx. 0.6Mpa・300L/min(ANR) | |||
| Power supply | 200 V, three-phase, 50/60 Hz | |||
| Standard accessory devices |
Variable capacity weighing table
Heater disconnection detection device Film tensioner Film end detection device Hopper level detection device Chute part tapping device
Overload detection device
Safety cover with stop function Touch panel Slitting device Belt conveyor |
|||
| Optional devices |
Seam tape detection device
Horizontal seal section bite detection device Empty bag detection device Seal pressure detection device Intermediate shutter device Dust collector Dust collection timing valve device Static eliminator Film reel air shaft Scrap winding device Ejection device Printing device Printing inspection device Nitrogen gas filling device I-notch cutting device Perforation and multiple cutting device Jagged blade cutting device Round corner cutting device Hole punching device
Multi-filling device
Collective rotary disk device Bucket conveyor device Sub-rotary disk device Feeder Petit scale Auger filling device Tablet and pill counting device Counting and separating device Stacking device Weight checker Weighing deviation feedback control Stainless steel cover Support for validation Special overseas specifications (UL/CE compliant) |
|||
- * Machines other than the above specifications can also be manufactured.
- *1 The number of rows is limited by the pouch width.
- *2Figures vary depending on the filled item, packaging material and bag dimensions.
- *3Air consumption figures are without optional devices.