The highly acclaimed R Series has been completely redesigned.
Simpler, more compact, and low price
We consider the main body of the packaging machine and various machines in the downstream processes as individual units. We propose a new packaging line system in which units can be freely combined according to the application. The RF Series, developed as the successor to the R Series, was designed based on this concept to enable flexible combination with units in the downstream processes.
Application examples
Granular dashi stock, powdered soups, seasonings, ingredients, granulated sugar, instant coffee, powdered cream, tea packs (tea, dashi), health foods, powdered soft drinks, drip coffee, powdered and granular pharmaceuticals, desiccants, oxygen absorbers, food additives, bath salts, capsules, tablets, pills, etc.
Features & benefits
- Achieves industry-leading throughput of 200 to 1,000 pouches per minute
- Variations for chute mounting to respond to diverse industries
- Long heat treatment time for reliable sealing and long filling time for a wide variety of materials
- As a packaging plant solution, it can be linked with peripheral devices.
- A wide variety of options for the downstream processes available
Cost reduction
Packaging material
Labor costs, etc.
Series | RF-35C RF-35G |
RF-36C RF-36G |
RF-51C RF-51G |
RF-52C RF-52G |
RF-58C RF-58G |
RF-66 | RF-86 | RF-100 |
---|---|---|---|---|---|---|---|---|
Print registration control | None | Included | None | Included | Included | Included | Included | None |
Packaging volume*1 | 0.5 to 20cc | 0.5 to 50cc | 0.5cc to 30cc | 0.5 to 50cc | ||||
Packaging capacity*1 | 200 to 400 pouches per minute (Maximum film speed: 28 m per minute) |
200 to 800 pouches per minute | 350 to 800 pouches per minute (Film speed: 46 m per minute) |
400 to 800 pouches per minute (Film speed: 55 m per minute) |
500 to 900 pouches per minute (Film speed: 63 m per minute) |
600 to 1000 pouches per minute (Film speed: 70 m per minute) |
||
Finished bag dimensions*1 | Length: 40 to 85 mm (Specified inside dimensions) Width: 30 to 90 mm (by replacing the film guide) |
Length: 40 to 125 mm (Specified inside dimensions) Width: 30 to 110 mm (by replacing the film guide) |
Length: 40 to 130 mm (Specified inside dimensions) Width: 30 to 110 mm (by replacing the film guide) |
|||||
Machine dimensions | Approx. 1,600 (W) × 870 (D) × 2,010 (H) mm | Approx. 1,900 (W) × 950 (D) × 2,100 (H) mm | Approx. 2,000 (W) × 1,200 (D) × 2,010 (H) mm | Approx. 2,400 (W) × 1,400 (D) × 2,010 (H) mm | Approx. 2,600 (W) × 1,500 (D) × 2,010 (H) mm | |||
Machine mass | Approx. 1,500kg | Approx. 2,000kg | Approx. 2,000kg | Approx. 3,000kg | Approx. 3,500kg | Approx. 4,000kg | ||
Power consumption | Approx. 6 to 8kw | Approx. 6 to 10kw | Approx. 8kw | Approx. 8 to 10kw | Approx. 10 to 12kw | Approx. 10 to 12kw | ||
Air consumption*2 | Approx. 0.5MPa・100L/min(ANR) | |||||||
Power supply | 200 V, three-phase, 50/60 Hz | |||||||
Standard accessory devices |
Automatic film coupling device
Film end detection device Hopper level detection device Film reel air shaft Seam tape detection device Vertical seal temperature regulator (representative detection) Chute part tapping device Heater disconnection detection device
Preheat bar open detection device
Automatic opening/closing device for preheating bar Rotary cutting device (G type only) Empty bag detection device Ejection device Overload detection device Safety cover with stop function Touch panel Stainless steel cover |
|||||||
Optional devices |
Bite detection device
Horizontal seal section gap detection device Seal pressure detection device Contact detection device for partitions in the turntable Intermediate chute device Dust collector Static eliminator Film tensioner Film ventilation hole processing device (needle hole roll type) Temporary four-side seal device Fine adjustment-type turntable Filling chute attachment/detachment device Printing device Printing inspection device Seal part engraving device Nitrogen gas filling device Automatic controller for cutting positions Multiple perforation cutting device
I-notch cutting device
Special shape cutting device Multi-filling device Collective rotary disk device Bucket conveyor device Sub-rotary disk device Feeder Super scale Auger filling device Tablet and pill counting device Belt conveyor Counting and separating device Counting and sorting device Stacking device Weight checker Weighing deviation feedback control Centralized lubrication device Support for validation Special overseas specifications (UL/CE compliant) |
- * Machines other than the above specifications can also be manufactured.
- * The standard specification type G type of RF-35, 36, 51 and 52 is equipped with a cutting device. Type C is not equipped with a cutting device.
Although types C and G are gear-driven as standard, servo motor-driven versions are also available. (RF-35, 36, 51 and 52 without trailing symbol) - * RF-66, 86 and 100 are not equipped with a cutting device.
When a cutting device is required, a cutting unit is connected as a downstream unit. - *1 Figures vary depending on the filled item, packaging material and bag dimensions.
- *2 Air consumption figures are without optional devices.