A new three-side seal pouch packaging machine appears, utilizing the features of the well-established R Series. The sealing bar-type heat seal system is used to package bulky fillings more neatly.
Features & benefits
- Adopting a servo motor
Servo motor control is used for film pitch feed, and the touch panel makes it easy to match printing patterns and change pouch length. - Sealing bar heat sealing system
Separate and independent vertical and horizontal sealing mechanisms ensure uniform sealing pressure. Compared to the heat roller system, this system provides a longer sealing time and stronger adhesion. - Clean sealing
The right and left sealing bars are designed for accurate sealing operation. The sealing bars start sealing from the vertical seal side (supporting point) toward the folded section to prevent wrinkles and ensure clean sealing results. (Patented) - Low cost
A low-cost machine with a simple mechanism has been realized. - Safety measures
Covers are provided for areas where there is a risk of burns, pinching, amputation, etc. Opening these covers stops the machine.
Application examples
Granular dashi stock, drip coffee, granulated sugar, Tea, instant coffee, dried vegetables, dried seaweed, seasonings for rice soup, furikake, powdered and granular pharmaceuticals, health foods, tablets, pills, capsules, bath salts, desiccants, etc.
| Machine for small bags | Machine for large bags | |
|---|---|---|
| Type | K-340 | M-340 |
| Packaging volume*1 | 0.5 to 30cc | 30 to 150cc |
| Packaging capacity*1 | 20 to 120 pouches per minute | 20 to 80 pouches per minute |
| Finished bag dimensions*1*3 | Width: 30 to 100 mm Length: 30 to 130 mm |
Width: 30 to 120 mm Length: 30 to 180 mm |
| Machine dimensions | 695 (W) × 730 (D) × 1,700 (H) mm | 695 (W) × 730 (D) × 2,070 (H) mm |
| Machine mass | Approx. 300kg | Approx. 350kg |
| Power consumption | Approx. 2kw | |
| Air consumption*2 | Approx. 0.5Mpa・70L/min(ANR) | |
| Power supply | 200 V, three-phase, 50/60 Hz | |
| Standard accessory devices |
Heater disconnection detector
Print registration mark controller Film tension controller Film end detector I-notch cutting device
Safety cover with interlock
Rotary cutting device Film forming guide knocking device HMI Body cladding |
|
| Optional devices |
Joint tape detector
Horizontal seal contamination detector Empty pouch detector Seal pressure detector Intermediate chute with shutter Dust collector Dust collection timing valve device Static electricity remover Defect pouch rejector Data code printer Data code print inspection device Nitrogen gas flushing device Multiple cutting device with perforator Zigzag cutting device Special shape cutting device Hopper level detector Telescopic type of turntable
Multiple products filling device
Multiple products assembling chute Bucket conveyor Belt conveyor Sub turntable Vibration feeder Stacking device Petit scale Auger filler Tablet and pill counting device Counting and dividing device Counting and grouping device Weight checker HMI Validation support Special overseas specifications (UL/CE compliant) |
|
- * Machines other than the above specifications can also be manufactured.
- *1 Figures vary depending on the filled item, packaging material and bag dimensions.
- *2 Air consumption figures are without optional devices.
- *3 Width is variable by replacing the film guide, and length is variable by servo motor.